Features

ePOWER 2600W True Sine Wave Inverter with AC Transfer Switch & Safety Switch

The ePOWER 2600W Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, ePOWER inverters deliver clean and energy efficient true sine wave AC power from your DC supply.

This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board.

Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second.

The ePOWER 2600W is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2600W of power for operation. All Enerdrive ePOWER Inverters are covered by our extensive 5 Year warranty.

ePOWER Inverter Features:

• Seamless 16A AC Internal Transfer Switch
• AC RCD/Safety Switch with test button
• Removable LED Remote Control Display Panel
• Regulated Pure Sine Wave Output
• Silent Operation
• Compact Size for Easy Installation
• USB Port for charging USB devices

  Model – Description	EN1120S-X	EN1120S-X-24v	EN1226S-X
  AC Output Power	2000W	2000W	2600W
  AC Output Current	8.7A	8.7A	11.3A
  AC Output Voltage	230 Vac / 50 Hz
  AC Output Waveform	Sinewave (<3% THD)
  Nominal DC Input Voltage	12.5 VDC	24.5 VDC	12.5 VDC
  No Load battery draw	< 1.5 ADC
  DC Input Voltage operating range	10.5 – 15.5 VDC	21.0 – 31.0 VDC	10.5 – 15.5 VDC
  Under Voltage Alarm	11.0 / 12.1 VDC	22.0 / 24.2 VDC	11.0 / 12.1 VDC
  Under Voltage Alarm Recovery	11.3 / 12.3 VDC	22.6 / 24.6 VDC	11.3 / 12.3 VDC
  Under Voltage Shutdown	10.5 / 11.8 VDC	21.0 / 23.6 VDC	10.5 / 11.8 VDC
  Under Voltage Shutdown Recovery	12.0 / 12.6 VDC	24.0 / 25.2 VDC	12.0 / 12.6 VDC
  Over Voltage Shutdown	15.5 VDC	31.0 VDC	15.5 VDC
  USB Port	5V, 2.1A
  AC Transfer Switch
  Transfer Time	< 30 ms
  Transfer Relay Rating	16A (resistive load)
  AC Input socket IEC-C20	16A max
  AC Output socket IEC-C19	16A max
  AC Output Front GPO	10A max
  Safety and Environmental
  Conformance	All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16
  EMI / EMC	CE EMC: EN/IEC 62040-2 category C1
  Agency Markings	RCM , CE
  Operating Temperature	0°C to 40°C
  Storage Temperature	-20°C to 60°C
  Relative Humidity	5-90% non-condensing
  Operating Altitude	Up to 3000 meters above sea level
  Weights and Dimensions
  Weight	5.9 kg	5.9 kg	7.0 kg
  Dimensions (W x L x H)	435x230x115 mm	435x230x115 mm	560x230x115 mm
  Warranty	5 Years

  
  
  

  Note: Specifications subject to change without notice.

  Estimate Run Time On Load

  Following run times are estimates for reference, based on using different battery bank sizes. Actual run times may vary.

  Important: Power Drain from DC Battery Bank.

  Please note that there is a power drain of approx 700mA from the battery bank when the Inverter is running in AC By-Pass mode. In order to avoid draining down the battery bank, a battery charger with sufficient power is required to maintain the battery bank voltage.

  Estimate run time on different 12V Battery Bank Size
  AC Load	60AH	120AH	180AH	240AH	300AH
  50 W	11 hrs	22 hrs	33 hrs	44 hrs	55 hrs
  100 W	5 hrs	11.5 hrs	17 hrs	23 hrs	29 hrs
  200 W	2.5 hrs	5 hrs	8 hrs	11 hrs	13.5 hrs
  500 W	49 mins	2 hrs	3 hrs	4 hrs	5 hrs
  1000 W	15 mins	49 mins	1.5 hrs	2 hrs	2.5 hrs
  1500 W	8 mins	27 mins	49 mins	1 hrs	1.5 hrs
  2000 W	N.R.	15 min	34 mins	49 mins	1 hrs
  2600 W	N.R.	11 min	25mins	37 mins	49 mins